To analyze the Temperature distribution of Helical Fin Profile of engine through CFDinvestigation
Keywords:
CFD, internal combustion engine, FLUENT Software, helical finAbstract
In order to convert the non-circular ducts into circular pipes, hydraulic diameter is used. This phrase, which refers to a circular tube, may be used to compute a variety of different things. The area of the cross-section and the perimeter of the wetted cross-section are represented by A and P in the equation below. 2D design is changed to 3D design for this study, and CFD results have been compared. Within the fins, water as well as ethylene glycol was also circulated, and also the effects were examined. As a result, the current study contributes to revealing and expanding the potential of helical fins with ethylene glycol in improving total heat exchanger performance while also lowering material costs for design engineers as well as manufactures
References
[1] ADDIN Mendeley Bibliography CSL_BIBLIOGRAPHY [1] V. Singh, O. Abdelaziz, V. Aute, and R. Radermacher, "Simulation of air-to-refrigerant fin-and-tube heat exchanger with CFD-based air propagation," Int. J. Refrig., vol. 34, no. 8, pp. 1883-1897, 2011, https://doi.org/10.1016/j.ijrefrig.2011.07.007
[2] L. Sheik Ismail, C. Ranganayakulu, and R. K. Shah, "Numerical study of flow patterns of compact plate-fin heat exchangers and generation of design data for offset and wavy fins," Int. J. Heat Mass Transf., vol. 52, no. 17-18, pp. 3972-3983, 2009,https://doi.org/10.1016/j.ijheatmasstransfer.2009.03.026
[3] O. Tonomura, S. Tanaka, M. Noda, M. Kano, S. Hasebe, and I. Hashimoto, "CFD-based optimal design of manifold in plate-fin microdevices," Chem. Eng. J., vol. 101, no. 1-3, pp. 397-402, https://doi.org/10.1016/j.cej.2003.10.022
[4] A. Zargoushi, F. Talebi, and S. H. Hosseini, "CFD modeling of industrial cold box with platefin heat exchanger: Focusing on phase change phenomenon," Int. J. Heat Mass Transf., vol. 147, no. xxxx, p. 118936, 2020, https://doi.org/10.1016/j.ijheatmasstransfer.2019.118936
[5] I. M. C. Santosa, K. M. Tsamos, B. L. Gowreesunker, and S. A. Tassou, "Experimental and CFD investigation of overall heat transfer coefficient of finned tube CO2 gas coolers," Energy Procedia, vol. 161, no. 2018, pp. 300-308, 2019, https://doi.org/10.1016/j.egypro.2019.02.096
[6] X. Zhang, Y. Ge, J. Sun, L. Li, and S. A. Tassou, "CFD modelling of finned-tube CO2 gas cooler for refrigeration systems," Energy Procedia, vol. 161, pp. 275-282, 2019, https://doi.org/10.1016/j.egypro.2019.02.092
[7] N. S. Effendi, S. S. G. R. Putra, and K. J. Kim, "Prediction methods for natural convection around hollow hybrid fin heat sinks," Int. J. Therm. Sci., vol. 126, no. July 2017, pp. 272-280, 2018, https://doi.org/10.1016/j.ijthermalsci.2018.01.002
[8] K. Lindqvist and E. Næss, "A validated CFD model of plain and serrated fin-tube bundles," Appl. Therm. Eng., vol. 143, no. June, pp. 72-79, 2018, https://doi.org/10.1016/j.applthermaleng.2018.07.060
[9] N. S. Effendi and K. J. Kim, "Orientation effects on natural convective performance of hybrid fin heat sinks," Appl. Therm. Eng., vol. 123, no. May, pp. 527-536, 2017, https://doi.org/10.1016/j.applthermaleng.2017.05.134
[10] C. Liu, W. Bu, and D. Xu, "Multi-objective shape optimization of a plate-fin heat exchanger using CFD and multi-objective genetic algorithm," Int. J. Heat Mass Transf., vol. 111, pp. 65-82, 2017, https://doi.org/10.1016/j.ijheatmasstransfer.2017.03.066
[11] S. Singh, K. Sørensen, and T. Condra, "Investigation of material efficient fin patterns for costeffective operation of fin and tube heat exchanger," Appl. Therm. Eng., vol. 126, pp. 903-914, https://doi.org/10.1016/j.applthermaleng.2017.08.010
