A Review on the Machinability Characteristic of Stainless steel in various machining operations
Keywords:
Turning, Milling, Grinding, Drilling, Steel, LubricationAbstract
Austenitic stainless steels are one the most adaptable grade in stainless steel and are widely employed in a variety of sectors. It possesses a high level of durability, ductility, toughness at cryogenic temperatures, and corrosion resistance. Despite the fact that austenitic stainless steels are the most widely utilized of the five stainless steel families and have excellent ductility, endurance, and resistance to corrosion, they do have some drawbacks that operate as stumbling blocks in some applications. Because of the diverse nature of stainless steels, it is tough to put their machinability in concrete terms. One of the most broadly adopted materials is austenitic stainless steel., accounting for 10% of global manufacturing of steel, with austenitic steels accounting for 70% of total stainless steels. According to data from the ISSF, global stainless steel output has been steadily increasing, and consumption is predicted to continue to rise each year. The current study briefly introduces some key ideas in austenitic stainless steel metallurgy, as well as some of the issues surrounding austenitic stainless steel machining. A review of the numerous works of researchers in this field is also included. Finally, a discussion of prospective research fields concludes this work.
References
[1] A. Kumar, R. Sharma, S. Kumar, and P. Verma, "A review on machining performance of AISI 304 steel," Mater. Today Proc., 2021, doi: https://doi.org/10.1016/j.matpr.2021.11.003
[2] T. Dyl, "The designation degree of tool wear after machining of the surface layer of duplex stainless steel," Materials (Basel)., vol. 14, no. 21, 2021, https://doi.org/10.3390/ma14216425
[3] A. T. Abbas, S. Anwar, E. Abdelnasser, M. Luqman, J. E. Abu Qudeiri, and A. Elkaseer, "Effect of different cooling strategies on surface quality and power consumption in finishing end milling of stainless steel 316," Materials (Basel)., vol. 14, no. 4, pp. 1-15, 2021, https://doi.org/10.3390/ma14040903
[4] P. S. Gowthaman, S. Jeyakumar, and B. A. Saravanan, "Machinability and tool wear mechanism of Duplex stainless steel - a review," Mater. Today Proc., vol. 26, no. xxxx, pp. 1423-1429, 2019, https://doi.org/10.1016/j.matpr.2020.02.295
[5] O. Öndin, T. Kıvak, M. Sarıkaya, and Ç. V. Yıldırım, "Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel," Tribol. Int., vol. 148, p. 106323, 2020, https://doi.org/10.1016/j.triboint.2020.106323
[6] Q. He, J. M. Paiva, J. Kohlscheen, B. D. Beake, and S. C. Veldhuis, "An integrative approach to coating/carbide substrate design of CVD and PVD coated cutting tools during the machining of austenitic stainless steel," Ceram. Int., vol. 46, no. 4, pp. 5149-5158, 2020, https://doi.org/10.1016/j.ceramint.2019.10.259
[7] R. D. Koyee, S. Schmauder, and R. Eisseler, "Machining of Stainless Steels: A Comparative Study," 3rd Int. Conf. Adv. Manuf. Eng. Technol., no. January 2015, pp. 53-62, 2013.https://doi.org/10.1080/21693277.2014.990539
[8] N. Sharma and K. Gupta, "Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304," Mater. Res. Express, vol. 6, no. 8, p. 86585, May 2019, https://doi.org/10.1088/2053-1591/ab1e59
[9] J. L. Endrino, G. S. Fox-Rabinovich, and C. Gey, "Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel," Surf. Coatings Technol., vol. 200, no. 24, pp. 6840-6845, 2006, https://doi.org/10.1016/j.surfcoat.2005.10.030
[10] D. Majak, E. U. Olugu, and S. A. Lawal, "Analysis of the effect of sustainable lubricants in the turning of AISI 304 stainless steel," Procedia Manuf., vol. 43, pp. 495-502, 2020, https://doi.org/10.1016/j.promfg.2020.02.183
[11] T. Singh, J. S. Dureja, M. Dogra, and M. S. Bhatti, "Multi-response optimization in environment friendly turning of AISI 304 austenitic stainless steel," Multidiscip. Model. Mater. Struct., vol. 15, no. 3, pp. 538-558, 2019, https://doi.org/10.1108/MMMS-07-2018-0139
[12] A. P. Kulkarni, G. G. Joshi, and V. G. Sargade, "Performance of PVD AlTiCrN coating during machining of austenitic stainless steel," Surf. Eng., vol. 29, no. 5, pp. 402-407, 2013, https://doi.org/10.1179/1743294413Y.0000000130
[13] A. I. Fernández-Abia, J. Barreiro, J. Fernández-Larrinoa, L. N. López de Lacalle, A. Fernández-Valdivielso, and O. M. Pereira, "Behaviour of PVD coatings in the turning of austenitic stainless steels," Procedia Eng., vol. 63, pp. 133-141, 2013, https://doi.org/10.1016/j.proeng.2013.08.241
[14] Y. Seid Ahmed, J. M. Paiva, and S. C. Veldhuis, "Characterization and prediction of chip formation dynamics in machining austenitic stainless steel through supply of a high-pressure coolant," Int. J. Adv. Manuf. Technol., vol. 102, no. 5-8, pp. 1671-1688, 2019, https://doi.org/10.1007/s00170-018-03277-7
[15] A. I. Nagy, E. R. Fábián, R. Horváth, and P. Terek, "Difficulties in the Machining Super Duplex Stainless Steels," Műszaki Tudományos Közlemények, vol. 11, no. 1, pp. 141-144, 2019, https://doi.org/10.33894/mtk-2019.11.31
[16] R. A. Mahdavinejad and S. Saeedy, "Investigation of the influential parameters of machining of AISI 304 stainless steel," Sadhana - Acad. Proc. Eng. Sci., vol. 36, no. 6, pp. 963-970, 2011, https://doi.org/10.1007/s12046-011-0055-z
[17] A. I. Fernández-Abia, J. Barreiro, L. N. L. De Lacalle, and S. Martínez, "Effect of very high cutting speeds on shearing, cutting forces and roughness in dry turning of austenitic stainless steels," Int. J. Adv. Manuf. Technol., vol. 57, no. 1-4, pp. 61-71, 2011, https://doi.org/10.1007/s00170-011-3267-9
[18] A. Hamdan, A. A. D. Sarhan, and M. Hamdi, "An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish," Int. J. Adv. Manuf. Technol., vol. 58, no. 1-4, pp. 81-91, 2012, https://doi.org/10.1007/s00170-011-3392-5
[19] M. Kaladhar, K. V. Subbaiah, and C. S. Rao, "Determination of Optimum Process Parameters during turning of AISI 304 Austenitic Stainless Steels using Taguchi method and ANOVA," Int. J. Lean Think., vol. 3, no. 1, 2012. https://doi.org/10.4314/ijest.v3i4.68545
[20] I. Korkut, M. Kasap, I. Ciftci, and U. Seker, "Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel," Mater. Des., vol. 25, no. 4, pp. 303-305, 2004, https://doi.org/10.1016/j.matdes.2003.10.011
[21] V. Vignesh, S. Ilangovan, and N. Radhika, "Statistical analysis of process parameters in drilling of SS410 stainless steel," Mater. Today Proc., vol. 46, no. xxxx, pp. 3313-3319, 2020, https://doi.org/10.1016/j.matpr.2020.11.470
[22] W. L. Ku, C. L. Hung, S. M. Lee, and H. M. Chow, "Optimization in thermal friction drilling for SUS 304 stainless steel," Int. J. Adv. Manuf. Technol., vol. 53, no. 9-12, pp. 935-944, 2011, https://doi.org/10.1007/s00170-010-2899-5
[23] S. A. El-Bahloul, H. E. El-Shourbagy, A. M. El-Bahloul, and T. T. El-Midany, "Experimental and Thermo-Mechanical Modeling Optimization of Thermal Friction Drilling for AISI 304 Stainless steel," CIRP J. Manuf. Sci. Technol., vol. 20, pp. 84-92, 2018, https://doi.org/10.1016/j.cirpj.2017.10.001
[24] A. Pal, S. S. Chatha, and H. S. Sidhu, "Performance evaluation of the minimum quantity lubrication with Al2O3- mixed vegetable-oil-based cutting fluid in drilling of AISI 321 stainless steel," J. Manuf. Process., vol. 66, no. April, pp. 238-249, 2021, https://doi.org/10.1016/j.jmapro.2021.04.024
[25] M. Pradeep Kumar and L. Shakeel Ahmed, "Drilling of AISI 304 Stainless Steel under Liquid Nitrogen Cooling: A Comparison with Flood Cooling," Mater. Today Proc., vol. 4, no. 2, pp. 1518-1524, 2017, https://doi.org/10.1016/j.matpr.2017.01.174
[26] M. Günay and T. Meral, "Modelling and multiresponse optimization for minimizing burr height, thrust force and surface roughness in drilling of ferritic stainless steel," Sadhana - Acad. Proc. Eng. Sci., vol. 45, no. 1, 2020, https://doi.org/10.1007/s12046-020-01490-3
[27] A. Jayaganth, K. Jayakumar, A. Deepak, and K. Pazhanivel, "Experimental studies on Drilling of 410 Stainless Steel," Mater. Today Proc., vol. 5, no. 2, pp. 7168-7173, 2018, https://doi.org/10.1016/j.matpr.2017.11.382
[28] H. Shao, L. Liu, and H. L. Qu, "Machinability study on 3%Co-12%Cr stainless steel in milling," Wear, vol. 263, no. 1-6 SPEC. ISS., pp. 736-744, 2007, https://doi.org/10.1016/j.wear.2007.01.074
[29] S. Tansukatanon, V. Tangwarodomnukun, C. Dumkum, P. Kruytong, N. Plaichum, and W. Charee, "Micromachining of stainless steel using TiAlN-coated tungsten carbide end mill," Procedia Manuf., vol. 30, pp. 419-426, 2019, https://doi.org/10.1016/j.promfg.2019.02.058
[30] J. Airao, B. Chaudhary, V. Bajpai, and N. Khanna, "An Experimental Study of Surface Roughness Variation in End Milling of Super Duplex 2507 Stainless Steel," Mater. Today Proc., vol. 5, no. 2, pp. 3682-3689, 2018, https://doi.org/10.1016/j.matpr.2017.11.619
[31] K. K. Wika, P. Litwa, and C. Hitchens, "Impact of supercritical carbon dioxide cooling with Minimum Quantity Lubrication on tool wear and surface integrity in the milling of AISI 304L stainless steel," Wear, vol. 426-427, no. January, pp. 1691-1701, 2019, https://doi.org/10.1016/j.wear.2019.01.103
[32] Y. Yuan, C. Wang, J. Yang, L. Zheng, and X. Weiqiang, "Performance of supercritical carbon dioxide (scCO2) mixed with oil-on-water (OoW) cooling in high-speed milling of 316L stainless steel," Procedia CIRP, vol. 77, no. Hpc, pp. 391-396, 2018, https://doi.org/10.1016/j.procir.2018.08.301
[33] A. Mizobuchi and A. Tashima, "Optimization of wet grinding conditions of sheets made of stainless steel," J. Manuf. Mater. Process., vol. 4, no. 4, 2020, https://doi.org/10.3390/jmmp4040114
[34] R. L. Rodriguez et al., "Application of hybrid eco-friendly MQL+WCJ technique in AISI 4340 steel grinding for cleaner and greener production," J. Clean. Prod., vol. 283, p. 124670, 2021, https://doi.org/10.1016/j.jclepro.2020.124670
[35] N. Zhou, R. L. Peng, and R. Pettersson, "Surface characterization of austenitic stainless steel 304l after different grinding operations," Int. J. Mech. Mater. Eng., vol. 12, no. 1, 2017, https://doi.org/10.1186/s40712-017-0074-6
[36] Z. guo Nie, G. Wang, F. Jiang, Y. liang Lin, and Y. ming Rong, "Investigation of modeling on single grit grinding for martensitic stainless steel," J. Cent. South Univ., vol. 25, no. 8, pp. 1862-1869, 2018, https://doi.org/10.1007/s11771-018-3875-8
[37] S. K. Tamil Vanan, E. U. Olugu, C. K. Ang, S. A. Lawal, and O. C. Aja, "Evaluation of surface grinding of AISI 304 stainless steel using dry and compressed air cooling techniques," SN Appl. Sci., vol. 3, no. 3, pp. 1-10, 2021, https://doi.org/10.1007/s42452-021-04395-w
[38] N. Zhou, R. L. Peng, M. Schönning, and R. Pettersson, "SCC of 2304 duplex stainless steel-microstructure, residual stress and surface grinding effects," Materials (Basel)., vol. 10, no. 3, 2017, https://doi.org/10.3390/ma10030221
